The most common reasons a Ford Explorer heater isn’t working are a broken heater blower motor, a problem with the thermostat, or a failed heater blower motor resistor.

Why is my car blowing out cold air when the heat is on?

There are a few basic issues that usually lead to the blowing of cool air from one’s car heating system: There isn’t enough coolant in the engine. There is a problem with your heater core. Your thermostats are not working correctly.

What makes your heat in your car stop working?

A heater can stop working for a number of reasons, including: A low antifreeze/water level in the radiator due to a leak in the cooling system. A bad thermostat that isn’t allowing the engine to properly warm up. A blower fan that isn’t working properly.

How do I reset my Ford Explorer climate control?

Remove the 10amp climate control module fuse in slot 46. After about a minute reinsert the fuse and turn the car to the accessory position. You’ll hear the vents cycling through and after a few seconds the system will be fully reset.

Why does my air work but not my heat in my car?

Reason #2: Problems with Heater Core Car heater problems are also frequently associated with heater core difficulties: coolant may not be traveling through the heater core properly, the air from the blower motor is not reaching it or there’s a clog in the small tubing of the heater core. … Fog inside of your car.

Can a bad radiator cap cause no heat?

Radiator cap: Your radiator cap regulates the pressure in the cooling system, acting as an escape valve if the pressure gets too high. If it sticks in the open position, there will be insufficient pressure in the system, and the coolant will not get hot enough, reducing the heater’s output.

Why does my heat get cold when I stop?

Insufficient Coolant The car coolant comprises of 50% antifreeze and 50% water. … However, in case, the air blowing out continues to be cool, check the coolant level. It is the first reason why car’s heats get cold when idling, as the car would not send less coolant would to the heater core to create warm air.

How do I reset my Ford Fusion climate control?

Using the controls around the climate control module, press the climate control power button along with the defrost button at the same moment. Now, decompress the buttons, and push the climate control power button once more. This should fully reset the cc in Your vehicle.

What is wrong with the Ford Explorer?

Despite its amazing build, the Ford Explorer disappointed in many categories. The most common problems included exterior body issues, transmission issues, and transmission failure. The line of cars was reported to show transmission lunging and jolting, with many claiming that the SUVs wouldn’t engage at all.

How do you reset a Ford HVAC module?

With the doors closed locate the climate control power button on the center dash and depress it simultaneously with the Edge’s defrost button. Hold for a few seconds and release. Press the climate control power button one more time and the HVAC should be reset.

Article first time published on

Can a blown fuse cause heater not to work?

A blown fuse is a symptom not a cause. … If a new fuse blows as soon as the blower is turned on, the heater circuit or motor may have a short that should be investigated. If the fuse lasts a while and then blows, the fan motor is probably running hot due to worn brushes and/or bushings and should be replaced.

Why is my car not blowing hot or cold air?

If your blower only works on the highest setting, your blower motor control module probably needs to be changed. If the fan isn’t working, you probably need to have the blower motor fixed or changed. If the air coming through isn’t hot, the heater core is probably clogged.

How do you know if your heater blower motor is bad?

1. Poor or Airflow from Air Vents. This will be the first and most obvious sign your blower motor has a problem. …
2. No Airflow At All From Vents. …
3. Skyrocketing Energy Bills. …
4. Strange Noises When You Turn on the Heat. …
5. Overheating Blower / Weird Smells.

What are the symptoms of a bad thermostat?

• #1 – Temperature Gauge Reading Higher (or Lower) Than Normal.
• #2 – Sudden Air Temperature Changes Inside Vehicle.
• #3 – Coolant Leaking.
• #4 – Rumbling Noises.
• #5 – Heater Malfunction.

What causes no heat at idle?

Two things come to mind, defective or wrong thermostat or low coolant level. The engine makes very little heat when idling, and if the thermostat does not close, the engine coolant temperature may drop low enough that you’ll get no heat from the heater core.

How can I heat my car without heat?

1. Park in the garage. …
2. Cover the windshield. …
3. Stock up on hand warming packets. …
4. Buy a heater or seat cover that plugs into your car. …
5. Keep blankets in the back seat. …
6. Take along a warm beverage.

How do you know when your radiator cap is bad?

1. Leaking Coolant. …
2. White Streaks on Radiator. …
3. Overflowing Reservoir. …
4. Radiator Hose Collapses. …
5. Radiator Hose Bursts. …
6. Overheated Engine. …
7. Air Inside the Cooling System.

Does coolant go to heater core?

as coolant circulates through the engine, some of that hot coolant passes through the heater core in the dashboard. as you use the temperature controls on your dashboard, your blower fan then moves the warm air to where you need it, for defrosting your windshield or heating the interior.

How do you test a radiator cap?

Select the adapter that is the same shape as the radiator filler neck on your specific vehicle. Pump the pressure tester to the pressure stamped on the radiator cap. If the pressure releases the pressure before reaching the correct pressure, or the cap does not hold pressure, the cap is faulty.

How long will a Ford Explorer last?

In most cases, a Ford Explorer can last anywhere from 10 to 17 years. With regular maintenance and annually driving 12,000 miles, you can expect a new Ford Explorer to last you closer to 15 years or longer.

Is there any recalls on Ford Explorer?

Ford is recalling more than 126,000 Explorer SUVs because a suspension component could break and cause the driver to lose control of the vehicle, increasing the risk of a crash.

What is the most reliable Ford Explorer?

The two best years for the Ford Explorer are 2010 and 2011. The 2010 Ford Explorer is a little older but has a very reliable engine. 2011 is much the same but has more modern features that many people find useful.

How do I perform the 2014 Ford Explorer climate control reset?

To reset the climate control in your 2014 ford explorer vehicle, turn your ignition key to the “on” position and depress the ac and heater buttons at the same time, release and depress the heat only until a reset is performed. Press Climate and Defrost, release, then press Climate.

How do I reset my blend door actuator Ford?

First thing You will need to do is remove the fuse for the actuator from the fuse panel in the driver’s footwell. After that You will want to start the car and run the AC system for a few minutes. Finally shut off the car and put the fuse back in and see if the blend door works.

How do I reset my Ford Edge heater?

To reset the heater on a for edge You will need to hold down the climate control button and the defrost button at the same time. This will reset it after about 20 seconds.

How do I know if my heater fuse is blown?

You may also need to use your multimeter to check if your fuses are blown. You can quickly determine by checking resistance with a multimeter. A good fuse will have nearly zero ohms of resistance, if the fuse is blown there will be no reading.

Is there a fuse for the heater blower in my car?

Many vehicles have two fuses for the blower motor, one in the interior fuse block and the other under the hood. The blower motor is usually under the dashboard on the passenger side.

How much does it cost to replace a heater blower motor?

An HVAC blower motor replacement costs an average of $450 but anywhere from $150 to $2,000 to replace. It doesn’t matter if you have a gas furnace, electric or heat pump, they all use an air handler blower motor to push the air throughout your home’s ducts.

How much does a blower motor cost for a car?

In most instances this repair is on the relatively inexpensive side. A new blower motor will run between $50 and $100. Most blower motors sit in the dash underneath the glove box, and are accessible for replacement. Installation will run in the range of $80–$100.

How do you know when you need a new car thermostat?

1. High Temperature. One of the first signs that your thermostat may need replacement is how high the temperature inside gets. …
2. Cold Engine. …
3. Temperature Gauge Issues. …
4. Coolant Level Issues.