When you have an uneven gap across the top of door, it can be caused by two common problems. The first is the door hinge side is out of plumb. This can be easily checked with a level placed on the jamb or hinges to check if they are correct. The most likely cause is that the floor is not perfectly level.

Why won't my door shut properly?

When a door latch won’t catch, it is usually because the door latch doesn’t align with the hole in the strike plate. … If the latch is too high or too low, try tightening your door’s hinges. If your door still won’t close after that, remove one of the screws on the jamb side of the hinge and drive in a 3-in.

Why are my exterior doors sticking?

When a wooden front door sticks, it’s often because the humidity is high and the wood is swollen. You can usually plane a little off the edges, but you have to be careful not to remove too much, or the gap will be too wide when the humidity goes down and the door shrinks.

Why is my door getting stuck?

The strike plate is a common culprit when it comes to a stuck door, because it can loosen over time and keep the door from closing smoothly. Sometimes the door simply doesn’t fit correctly in the door opening, and you’ll have to do a bit of reconfiguration tightening or sanding.

What are pivot hinges?

A pivot hinge is a hardware mechanism that allows a door to open and close using a pivot system instead of a traditional ‘butt’ hinge. … This allows them to be adjustable and swing in both directions, so that the door can be opened either inwards or outwards.

How does a pivot door work?

A pivot door is visually very different from a regular hinged door. When the hinge is placed 4“ from the side of the door, these 4“ create the pivot door’s ‘tail. ‘ This tail will swing inward for an outward swinging door and outward for an inward swinging door. This allows for beautiful, elegant door movement.