Prime Lumber is a grade description for a special product variation of two inch dimensional lumber intended for use where appearance is a consideration. … While PRIME lumber may “look” better, it has the same design strength values as lumber which does not classify as PRIME.

What is primed pine board used for?

3/4″ Primed Pine Boards Boards are made of finger-jointed clear Radiata Pine with an exterior grade primer. These boards can be used interior or exterior. These boards are often used for exterior trim, fascia, bookshelves, shelving and furniture. Boards can be cut at our saw-house for easier transportation.

Is finger-jointed trim good?

Finger Joint Performance It can work well, in larger pieces when there is ample gluing surface to help hold the pieces together, but it still has one fatal flaw. Wood moves. Wood expands and contracts in response to the conditions in the environment around it like heat, cold, and moisture.

What does primed Pine mean?

Primed FJ Pine is pre-coated with two coats of a specially developed water-based primer. It is manufactured from FJ Clear Pine which provides enhanced strength & stability and finger jointed glue-bonds offers longer lengths.

What is the difference between prime and treated lumber?

Pressure treated lumber is no stronger than untreated lumber. The difference between the two is that pressure treated lumber will resist the elements better than untreated due to chemical preservatives added, and so will maintain its integrity in conditions that would cause normal wood to rot.

Do you need to undercoat pre primed timber?

Put simply, pre–primed mouldings are those which have been coated with a paint primer, eliminating the need for the use of an undercoat. This means you will save time and money having the convenience of your timber delivered ready to install, and paint your final colour.

What are the different grades of wood?

GradeTrade NameMin. cutting sizeFirsts and SecondsFAS4″ x 5′ or 3″ x 7’FAS One FaceF1F4″ x 5′ or 3″ x 7’SelectSEL4″ x 5′ or 3″ x 7No. 1 Common1C4″ x 2′ or 3″ x 3′

What is the best wood for exterior trim?

is the premier of all trim woods. Its natural weather-resistant qualities make it perfect for any exterior trim work. It’s strong, straight and has an ambient quality that adds character and value to any home.

What is FJ wood?

These products may be glued together in three ways: end-jointed (where “fingers” are cut into the ends of the pieces before they are joined, hence the nickname “finger-jointed” lumber), edge glued or face glued.

Which is better MDF or pine?

MDF is great for many reasons. Unlike Pine, there’s no knots or imperfections and MDF requires less time to prepare. … Since MDF can be machined so quickly, it’s the material of choice for most people. MDF is also cheaper than Pine making it great for keeping costs down.

Article first time published on

Can I paint primed pine?

You can apply primer with a brush, roller or by spraying, and one coat is all you need. After the primer dries, a light sanding with 150-grit or finer sandpaper is all it usually takes to knock down the grain. For best results, you should paint within a week of priming.

What is MDF primed?

MDF is medium density fiberboard and usually made offshore. … MDF has zero imperfections. It is always primed and ready for paint. MDF and has zero warps or twists in the material.

Is pine or poplar better for trim?

Poplar is a good choice for projects where a premium-quality painted finish is the goal. Also, poplar, which is actually a hardwood, is a bit more durable than pine, which makes it a better choice for applications that receive lots of traffic or abuse, like chair rail in a dining room or wainscoting in a mudroom.

What is the best wood to use for baseboards?

Hardwoods like oak and maple are an excellent choice of baseboard materials if seeking wood baseboards that can be stained. Hardwoods take stain and varnish well but are significantly more expensive than jointed pine and MDF.

What are paint grade baseboards?

Paint Grade: The paint grade materials are composite materials that are primarily man-made; the most common is medium-density-grade (MDF) fiber board. Compared to hardwoods, these materials are very inexpensive, easy to work with, and can be painted to match any décor.

Why is treated lumber cheaper than untreated?

Affordability. Pressure-treated wood is notably cheaper than cedar, redwood, and other types of wood. And, because of its durability, you’re much less likely to experience a need for costly repairs in the future. It is a great choice for those operating on a smaller budget.

Is Primed Pine pressure treated?

Every piece meets the highest grading standards for strength and appearance. This lumber is pressure-treated with micronized copper azole in order to protect it from termites, fungal decay and rot.

What is No 2 prime lumber?

#2 Prime: A step up from #2 Grade in appearance, this grade will have characteristics similar to those found in #2 Grade— the difference is #2 Prime is virtually wane-free. When referring to fence boards, this grade is often called Appearance Grade.

What is the best grade of hardwood?

What Does a Lumber Grade Mean? Grades are based on the amount of usable clear material in a board. The highest grade boards are FAS and Select, followed by #1 Common and #2 Common.

What does WP mean on wood?

Western Wood Products Association is one of the largest associations of lumber manufacturers in the United States, representing sawmills in the 12 western states and Alaska.

What does BTR mean in lumber?

BTRBetterB&BB & BetterCON COMConstruction Common RedwoodCON HEARTConstruction Heart RedwoodSTD BTRStandard & Better

What is the difference between a primer and undercoat?

Although similar, both serve quite different functions. Primers act as a foundation for your paint to stick to while undercoats create a flat and level base for topcoats. One easy way to remember is if a surface is painted use an undercoat, if it’s new use a primer.

Does MDF need primed paint?

Dull or Plain Look: Most interior trim primers are not designed to act like paint, and you need to consider painting pre primed wood or MDF trim. The job of MDF or wood trim primer is to adhere to the surface and fill up the pores with that first so that the paint can do its job.

Is undercoat and primer the same thing?

Primer is the first coat which is used on the bare surfaces while the undercoat is the second coat of the paint which is provided on the wall over the primer. Primer gives the paint a good base which will form a strong bond to stick to undercoat and improves the overall appearance.

What is finger jointed casing?

Finger jointed pine is a solid pine timber where the board is created using small, individual pieces joined together with glue and small interlocking ‘fingers’ to create a neat zig zag effect at the join site.

What is finger jointed timber?

Finger jointed products are created from quality New Zealand pine from which defects, such as knots, have been removed. Finger joints are precisely cut into the pieces of timber, and each joint is then glued in place. This creates a product with stability and strength superior to the original pieces of timber.

Are finger jointed studs stronger?

Both finger-jointed and sawn studs are strong enough for short-term bending or tension loads (from wind, earthquakes, and impact, for instance), but not for long-term exposure.

What is trim on the outside of a house?

Trim on a home’s exterior typically includes the material that edges the windows and doors, the fascia board that runs along the lower edge of the roof and the soffits beneath the roof. … Traditionally, whether a home has brick, stucco or stone siding, the trim material is wood.

Can Douglas fir be used as exterior trim?

Doug Fir is one of the most widely used of all the exterior wood trim materials. Doug Fir is affordable and has a minimal number of knots which are usually tight and don’t fall out.

Should exterior trim be pressure-treated?

An exterior all-acrylic latex house paint would be the best choice for painting pressure-treated wood. … Pressure-treated wood may not be the best choice for exterior trim, since most pressure-treated wood is southern yellow pine, a species that is not particularly good at holding paint.

Is MDF already primed?

MDF is quite an absorbent material and typically you will need to apply at least two coats of primer. … Once you have finished with the primer, rubbed down and wiped down with a damp cloth – leave it to dry – you can apply the top coat.