A comfort height toilet is sometimes known as an Americans with Disabilities Act (ADA) toilet because the height matches that used for ADA-compliant toilets, 17 to 19 inches from floor to seat. This is like the height of a chair. The height of a standard toilet is about 15 inches from floor to seat.

What makes an ADA compliant toilet?

Accessible Toilets An ADA-compliant toilet should be at least 60 inches wide and have a seat between 17 and 19 inches from the base of the unit to the seat top. … Also, ensure to include grab bars around the toilet area to help make your toilets accessible.

Are ADA toilets higher?

Whereas the height of a standard toilet is 17 inches or lower — 14 1/2 inches is a common height — the ADA guidelines mandate a distance between 17 and 19 inches from top of the seat to the floor on a handicap toilet.

How do I know if my toilet is ADA?

Measure the toilet from the base of floor to the top of the seat. The top of the toilet bowl, with the toilet seat attached, must be between 17” – 19” after installation to comply with ADA regulations.

Do all bathrooms need to be ADA compliant?

The ADA requires at least one ADA-compliant restroom for each gender. Therefore, if your floor space is no more than 2,500 square feet, both restrooms will need to be compliant with the ADA. If instead, your facility has a cluster of single-use restrooms, at least half of them must be ADA-compliant.

Which toilet height is best?

The ideal height for your toilet will depend on three things. Standard toilets are usually around 15 inches high at the seat. If you are a tall person, that could be too low for you. You might want to check into a floor-mounted “comfort height” toilet that is 17 to 19 inches in height or elevated toilet seats.

How big does a ADA bathroom need to be?

To start with, the ADA requires a clear floor space of at least 60 inches in diameter for the turning space within a bathroom, in addition to the space taken up by the sink, toilet, and/or shower/tub. But technically, the ADA does not have a minimum space requirement for the overall size of an accessible bathroom.

What is the most common toilet height?

Toilet height is measured from the floor to the top of the seat. Heights vary enough to be noticeable. Most often, they fall somewhere between 15” and 19”, with standard toilets coming in under 17”. However, chair height toilets, what Kohler refers to as Comfort Height® toilets, measure 17” or more.

What is the highest handicap toilet?

Highline™ Tall Two-piece elongated 1.28 gpf tall height toilet. The Highline® Tall is Kohler’s tallest toilet – a full 2″ taller than Comfort Height® toilets to provide ultimate accessibility and ease of use.

What is the smallest ADA bathroom?

In general, minimum accessible bathroom size is 60 inches wide by 56 inches deep plus clearance space for fixtures. Adding more fixtures or door swings will demand more space and a larger bathroom.

Article first time published on

Who is exempt from ADA?

Q: Who Is Exempt From The ADA? A: The ADA does not apply to religious organizations, private clubs or any entity historically exempt from federal civil rights laws, such as places of worship and facilities controlled by religious organizations (school, day care, etc.).

Do ADA bathroom doors swing in or out?

Current ADA Guidelines Current guidelines for bathrooms, published in 2010, allow the bathroom door to swing inward “as long as there is a clear floor space” beyond the door swing, when open.

Does an ADA bathroom require a sink?

At least one sink in each ADA compliant bathroom must meet these minimum requirements. … The sink must also be installed so that the highest point (either the front rim or the countertop) is a maximum of 34 inches above the finished floor.

Can ADA bathroom door swing out?

The bathroom doors can open both to the outside or inside. It is the same for ADA bathrooms, as well. … According to the 2010 law, ADA bathroom doors need to be at least 32 inches (81 cm) wide, while the swing of the door can interfere with the clear maneuvering area about 12 inches (30 cm) max.

Why would I want an elongated toilet bowl?

Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.

Are chair height toilets better?

It is more comfortable for taller people and for people who have a hard time getting up from a low seat, like the elderly or disabled. It will measure 17 to 19 inches from the floor to the seat. Often this height toilet is priced less than the standard height toilet.

Are American Standard toilets good?

The American Standard toilet is not only one of the best toilets you can get, it’s also the brand that plumbers recommend most. Their toilets are water-conserving while offering great flushing power. Many of these toilets are also ADA compliant and make going Number 2 actually feel like sitting on a very comfy throne.

What is better a one piece toilet or two?

One piece toilets are typically heavier and easier to clean, and there’s less space for bacteria to grow. Because two piece toilets feature a detachable tank, they’re more customizable for preferred styles and heights. Both styles can include bells and whistles like bidet attachments or low-flow energy saving.

What's the difference between chair height and comfort height toilets?

‘Chair height’ is commonly used for toilets bearing the height of 17 inches. ‘Comfort height’ also means chair height but is brand-specific. … The 17 to 19-inch height starts from the upper part of the seat and down to the floor. This is the number set by ADA or Americans with Disability Act for compliance.

How tall are American Standard toilets?

A comfort height toilet is sometimes known as an Americans with Disabilities Act (ADA) toilet because the height matches that used for ADA-compliant toilets, 17 to 19 inches from floor to seat. This is like the height of a chair. The height of a standard toilet is about 15 inches from floor to seat.

Where are Kohler toilets made?

Kohler has kept three U.S. toilet plants—in Kohler, Wis.; Brownsville, Texas, and Spartanburg, S.C.—and runs a large plant in Monterrey, Mexico.

How much room is needed for an ADA toilet?

There must be a clearance around a toilet of a minimum of 60” from a side wall. Also, the water closet, measured perpendicular from the rear wall, must be a minimum of 56” deep for wall mounted units and a minimum of 59” deep for floor mounted units to allow wheelchair access.

What size are handicap toilets?

The standard ADA (Americans with Disabilities Act) height toilets must have, a 17”-19” floor to bowl rim height, including the seat. You should also consider the toilet rough-in from the wall, which is commonly 12”. Other rough-in dimensions in older homes can be 10” or 14”.

Is Amazon ADA compliant?

The Amazon class action lawsuit argues that Amazon’s practice of not making its website compatible with web reading tools is discriminatory, as established by the ADA, which states that “no individual shall be discriminated against on the basis of disability in the full and equal enjoyment of goods, services, …

Is your job protected under ADA?

If you have a disability and are qualified to do a job, the ADA protects you from job discrimination on the basis of your disability. … To be protected under the ADA , you must have, have a record of, or be regarded as having a substantial, as opposed to a minor, impairment.

Does private property have to be ADA compliant?

The ADA does not apply to individually owned or leased housing in the private sector not used as a public accommodation, including single family homes, condominiums, or apartments. (Many types of multi-family housing in the private and public sectors are subject to the design requirements of the Fair Housing Act.)

What is code for handicap bathroom?

More specifically, it should not be higher than 34 inches from the floor and should have a 27 inches high clearance from the knee. The sink should also be 11 to 25 inches deep, and 30 inches wide. Other additional requirements are clear floor space and insulated pipes located under the sink.

How wide is a ADA toilet?

ADA bathroom requirements state that this type of stall shall be at least 56 inches deep for wall-hung toilets and at least 59 inches deep for floor-mounted toilets. The width must be at least 60 inches, as measured from the right angle of the sidewall or partition.

How far should an ADA toilet be from the wall?

The center line of the toilet must be between 16 and 18 inches from the side wall. A clear circle of at least 60 inches around the side wall and 56 inches from the rear wall to allow a wheelchair to turn (the door cannot swing into the minimum required area for wheelchair-accessible toilet compartments).

Should disabled toilets have lids?

There should be no lid on the WC seat. This will interfere with the use of the back pad. … The toilet paper, wash basin, soap dispenser and towel/hand drier should be within easy reach of a user sitting on the toilet. The wash basin should have a lever-operated mixer tap on the side closer to the WC.