A ridge turret is a turret or small tower constructed over the ridge or apex between two or more sloping roofs of a building. … It can have a flat roof but usually has a pointed roof or other kind of apex over.

What is the purpose of a turret on a house?

A turret is a small tower on top of a tower or attached to a side or corner of a building. They may be round, square, hexagon and octagon … anything that results in a narrow tower-like structure attached to or part of the main structure. Turrets had a very practical purpose for castle and fortress defense.

Why is it called a turret?

The name derives from the pre-existing noun turret, from the French “touret”, diminutive of the word “tower”, meaning a self-contained protective position which is situated on top of a fortification or defensive wall as opposed to rising directly from the ground, in which case it constitutes a tower.

What's the difference between a tower and a turret?

A turret is simply a small, circular tower attached to a larger structure, usually on a corner or angle. The difference between a turret and an actual tower is that turrets typically don’t start at the ground level and, rather, cantilever out from another upper level.

What is a metal turret?

A turret punch or turret press is a type of punch press used for metal forming by punching. Punching, and press work in general, is a process well suited to mass production.

Do turret cameras move?

Turret Camera Also known as mini-dome, eyeball or flat-faced dome camera, it has a ball and socket design which allows it to rotate freely once the base is mounted. It’s largely preferred thanks to this feature as it allows you to view multiple directions with a single camera.

What style of house has a turret?

A Victorian-style turret, or tower, is probably the most prominent homebuilding feature that most people picture in their minds when they think Victorian architecture.

Why are castle turrets round?

Round towers, also called drum towers, are more resistant to siege technology such as sappers and projectiles than square towers. The round front is more resistant than the straight side of a square tower, just as a load-bearing arch. This principle was already understood in antiquity.

What is a round room on a house called?

A rotunda (from Latin rotundus) is any building with a circular ground plan, and sometimes covered by a dome. It may also refer to a round room within a building (a famous example being the one below the dome of the United States Capitol in Washington, D.C.). … A band rotunda is a circular bandstand, usually with a dome.

What is the tall part of a castle called?

A battlement is the upper walled part of a castle or fortress. It’s usually formed out of a low, narrow wall on top of the outermost protective wall of a fortress or castle. The word ”battlement” traces to an old French term that means tower or turret, and the original use of battlements was for protection.

Article first time published on

How did ww2 tank turrets rotate?

The turret sits in a wide circle at the center of the hull. … Turning the traverse gear rotates the turret on the hull, allowing the tank crew to aim the main gun without turning the entire tank. The crew can also pivot the main gun up and down.

What part of a car is the turret?

The elevated central portion of the roof of a passenger car. Its sides are pierced for light and ventilation.

How are tank turrets attached?

The turret traversing motor is attached to the turret itself, and when the turret and hull are mated together, a geared shaft from the turret motor engages the gear teeth on the hull, and that’s what turns the turret. Nothing “attaches” the turret to the hull, except gravity.

Can you metal roof a turret?

Turret roofs are very difficult to cover with most roofing materials. Metal is usually the best choice for roofing and waterproofing all types of turrets. Metal roofing materials for turrets can be made of copper, steel, aluminum and other metals.

How does turret punch work?

Turret punching involves pushing a punch through a piece of metal to create a hole. There may be a die on the other side of the hole to contain the metal. The turret punch can make holes in a variety of different diameters and can make about as many holes in a sheet of metal as you may need for your fabrication.

What is the difference between capstan and turret lathe?

The Key Difference between Capstan and Turret Lathe is that Capstan Lathe is a light-duty machine. Turret Lathe is a heavy-duty machine.

Can I add a turret to my house?

By stacking a turret over another room, you get twice as much dramatically beautiful space without doubling your building costs. Building from the ground up is easier than extending a room out from the side of a house, and the stacked approach means you can get by with a single roof.

What is a turret bedroom?

Turret and round rooms offer a distinctive space along with with decorating challenges. Turrets in family homes became popular during the Victorian era, when they were prized for their abundance of light and air. … A turret room can offer special place for your little pleasures.

How much does a turret cost?

LevelTotal PriceDPS0$4,000121$4,500122$6,500263$11,50034.66

When would you use a turret camera?

Use turret dome cameras indoors as they are easier to install on the ceiling (which are usually inside) and usually have more of a wide viewing angle.

Can you install turret camera on wall?

When determining where to install your turret security camera, you’ll want to keep a couple of things in mind. … This gives you the ability to install your camera on a flat surface regardless of the installation site. You can use a wall mount, a ceiling mount, or a pole mount to achieve the desired camera position.

Is a turret camera PTZ?

Turret vs. PTZ (pan tilt zoom) CCTV IP cameras: PTZ security cameras are a kind of dome cameras. The turret security cameras are less intrusive and smaller compared with PTZ type. PTZ security cameras tend to be much expensive for their powerful PTZ control, preset, patrol and other advanced features.

What is the small room on top of a house called?

A garret is a room at the very top of a house, just underneath the roof. … Garret comes from the old French word guerite, which means “watchtower” or “sentry box.” These days, a garret has nothing to do with war; it simply means the little room at the very top of a building, which is also called an attic.

What is the roof over a window called?

A dormer is a roofed structure, often containing a window, that projects vertically beyond the plane of a pitched roof.

What are Gables on a house?

A gable is the generally triangular portion of a wall between the edges of intersecting roof pitches. … Sharp gable roofs are a characteristic of the Gothic and classical Greek styles of architecture. The opposite or inverted form of a gable roof is a V-roof or butterfly roof.

Why did lords stop building castles out of wood and start building them out of stone?

Originally castles were made of wood and timber. Later they were replaced with stone to make them stronger. … After the Middle Ages castles weren’t built as much, especially as larger artillery and cannon were designed that could easily knock down their walls.

What is a Bailey in a castle?

A bailey or ward in a fortification is a courtyard enclosed by a curtain wall. In particular, an early type of European castle was known as a motte-and-bailey.

What are the turrets on a castle called?

In architecture, a turret (from Italian: torretta, little tower; Latin: turris, tower) is a small tower that projects vertically from the wall of a building such as a medieval castle. … A turret can have a circular top with crenelations as seen in the picture at right, a pointed roof, or other kind of apex.

What is a buttery in a castle?

A buttery was originally a large cellar room under a monastery, in which food and drink were stored for the provisioning of strangers and passing guests. … At larger monasteries there would also be a basic hostelry, where travellers could sleep for free.

What are the up and down bits on a castle called?

These gaps are termed “crenels” (also known as carnels, or embrasures), and a wall or building with them is called crenellated; alternative (older) terms are castellated and embattled. The act of adding crenels to a previously unbroken parapet is termed crenellation.

What are the holes in a castle wall called?

An embrasure is the opening in a battlement between the two raised solid portions, referred to as crenel or crenelle in a space hollowed out throughout the thickness of a wall by the establishment of a bay.