Scotia is a decorative moulding used to cover the gap without removing the skirting. Scotia is fixed to the skirting board and over the top of the flooring around the perimeter of the wall. … You would use Scotia if you were not putting your skirting on top of the wood floor.

What is a Scotia board?

Scotia is a decorative and practical addition to solid wood, engineered wood and laminate flooring. It presents a neat finish and covers the expansion gap.

Do you have to use Scotia for laminate flooring?

It always looks nice to have scotia around the edges of a laminate floor, so i would suggest in doing this. Also, it hides the cutting that goes up to the edges of the skirting boards. If you have skirting boards being placed over the scotia, you do not need to lay scotia.

How do you fit Scotia flooring trim?

Cut the Scotia sections to fit along each straight section of skirting board. To achieve a neat finish, cut each piece of trim to 45 degrees using the mitre saw. When cut and fitted in position, the Scotia should be nailed to the skirting by spacing one nail every 30cm.

What is Scotia timber?

Scotia is a concave moulding traditionally used to finish an internal corner, such as underneath a window sill, or between floorboards and skirting boards.

What is Scotia used for?

Scotia is a decorative moulding used to cover the gap without removing the skirting. Scotia is fixed to the skirting board and over the top of the flooring around the perimeter of the wall. Scotia is of a concave design.

What is Scotia building?

The piece running between the wall and ceiling at the top of the wall is called a “Scotia” or a “Cornice”. … This means that the Plasterboard to the wall and the Plasterboard to the ceiling are joined together with a bead of plaster compound otherwise known as “Stopping Compound”.

How do you end a Scotia trim?

Cutting. Any end of scotia that joins to another piece will need to be cut to a 45-degree mitre joint so that the two pieces fit together seamlessly. Use a pencil to mark the cut, a mitre box to guide it (whether it’s an inside or outside corner you’re cutting) and a fine-toothed saw to complete the job.

How do you stick down Scotia?

To fit scotia using nails, secure into position by nailing the scotia to the skirting by spacing one nail every 30cm, ensure you don’t nail the scotia to the floor. To fit scotia using adhesive, apply grab adhesive to the back of the scotia and carefully apply to the wall, ensuring not to get any on your flooring.

Can you lay laminate flooring without removing skirting boards?

It is definitely possible to achieve a professional-looking finish without removing your skirting boards and fitting laminate beading. But it is distinctly more difficult to create a smooth transition from wall to the floor in this way.

Article first time published on

Should beading match floor or skirting?

It comes down to preference really. Most of the beadings that I have seen are the same colour as the floor. I guess if you don’t like it you can always paint it white to match the skirting boards? Not that I like beading as an option, however if you can, then paint it the colour of the skirting.

Does hybrid need Scotia?

Why do I need it? A: Scotia, sometimes referred to as quad or beading is a timber moulding trim used on the base of walls to cover the expansion gap required when installing any floating floor. National Tiles stocks more than 30 colours of Scotia to ensure a close match to your National Tiles Hybrid Flooring.

What is Quad flooring?

A quad is a narrow strip of wood that matches the colour of the new floor that is being installed. Quads are also known as Scotia moulding, quad moulding, quad beading and quad trim, but mention any of these names to your flooring installer and they will know what you are asking.

How wide is Scotia beading?

SpecificationProduct Height16 mmProduct Length2.4 mProduct TypeScotia Laminate BeadingProduct Width16 mm

What is a stair Scotia?

Scotia Moulding – The timber moulding that sits around a cut string staircase. … Spindles – Turned, carved or otherwise vertical sections placed between the handrail and the stair tread or string. Also known as balusters.

Can you use a nail gun on laminate flooring?

Although a nail gun is unnecessary when installing laminate flooring, a hammer or mallet is required whether working with glue-together or snap-together style floors.

What angle do you cut beading?

When joining two ends of scotia together, they will need to be cut to a mitre joint, this means cutting at a 45 degree angle for a seamless finish. For internal and external corners measure the distance to the next corner and mark onto the back of the scotia, and the intended direction of the mitre cut.

Do you need beading for laminate flooring?

Beading refers to a strip of floor edge trims which can be used alongside skirting or by itself with your laminate or hardwood floor. … While beading is not essential for laying your laminate floor, in a lot of cases it makes the final finish look better by tidying up any loose gaps in the edge of the floor boards.

How soon can you walk on laminate flooring?

wait for the floor to cure Before you use your new floor or move into the room, make sure the floor is completely cured. Do not walk on the floor for 24 hours after installation. If you do, it will damage the installation, resulting in an uneven floor.

What is architrave?

Architrave is a form of interior moulding that is featured in most houses, offices and other buildings. In this case, it is the strip of material that rounds off the wall and door. While ‘architrave’ is the correct term for the moulding, it can also be mistaken for: Door Casing.

Do you need to leave a gap around laminate flooring?

When laying laminate flooring it is essential that you leave at least a 10-12mm expansion gap around the perimeter of the floor. … However, you won’t need to worry about any spaces around the perimeter of your installation. Expansion gaps are easily covered by beading, skirting boards, door bars, and radiator collars.

What is floor edging called?

In architecture, a baseboard (also called skirting board, skirting, wainscoting, mopboard, floor molding, or base molding) is usually wooden or vinyl board covering the lowest part of an interior wall. Its purpose is to cover the joint between the wall surface and the floor.

What is a transition strip for laminate flooring?

Transition strips for laminate flooring They ensure a smooth transition between different floors, from a room to another, or inside a room if different floors are used.

Can you silicone the edge of laminate flooring?

Laminate flooring is installed within living rooms and hallways, and bathrooms and kitchens. … Silicone caulking these edges will ensure your laminate panels will not be warped over the years from moisture damage.

Can beading look good?

Beading is a good-looking way to hide the gaps and rough edges left after a flooring project is finished. They function almost like skirting boards and come in the same sorts of materials – hardwood, MDF, plastic – but they are used when flooring has been put down without removing the skirting boards first.

Do you need beading with LVT?

LVT Click requires a 5mm expansion gap around the perimeter and therefore needs beading or skirting boards placing on top. Underlay as also needed as well as a reasonably smooth sub-floor.

Can you reuse skirting?

Skirting board and architrave can be reused if it is in good condition and doesn’t get damaged when it is removed from the walls.