ATA chapters (sometimes called “ATA 100 System Codes”) are a way of categorizing the various systems that are on a plane, originally created by the Air Transport Association in 1956. … At the bottom of every single page is the ATA chapter for that manual. ATA chapters are configured like this: 12-34-56.

What is the purpose of ATA chapters?

Air transportation Association (ATA) published a numbering system to learn and understand the technical features of an Aircraft. ATA chapters make it easy to categorize technical information.

What is the ATA chapter for communication?

ATA NumberATA Chapter nameATA 23COMMUNICATIONSATA 24ELECTRICAL POWERATA 25EQUIPMENT /FURNISHINGSATA 26FIRE PROTECTION

Where are ATA chapters used?

This mission is what helped spark the ATA chapters list, allowing for a comprehensive guide and numbering system to provide guidelines for technical manuals. The ATA Chapters list is widely used by many airliners in order to assist in maintenance for their in-service parts and components.

What is ATA chapter and what are the ATA 100 system codes?

ATA Chapters, also known as the ATA 100 System Codes, refers to the categorization of parts as organized by the Air Transport Association. These numbers will typically be found in any Component Maintenance Manual (CMM) for any civilian aircraft and one category can consist of several subcategories for different parts.

What is ATA 32?

The ATA 32 landing gear control units contribute to the optimum control of all landing gear parameters during taxiing, take-off and landing phases. …

What ATA chapter are batteries?

(Refer to Chapter 91) Power for the electrical system is provided by an alternator and/or the battery.

What is AMM in aviation?

(AMM)

What ATA chapter is oil level sensor?

ATA Chapter 79 Oil – Part Number Details.

How many ATA chapters are there?

The ATA 100 chapters refers to the numbering system and referencing standards for commercial aircraft documentation. Through the 100 chapters, different systems and procedures of aircraft are detailed, allowing personnel to understand certain areas of commercial aircraft quickly and easily.

Article first time published on

How many ATA codes are there?

The Air Transport Association (ATA) 100 refers to the ATA numbering system, a commonly used standardized system that serves for documenting parts, components, or entire commercial aircraft.

What ATA chapter is thrust reverser?

Hydraulic Thrust Reverser ATA-29.

How do you read ATA chapters?

ATA chapters are configured like this: 12-34-56. This most important numbers are the first two. So in my example here, you would say, “That’s chapter twelve.” For example, Chapter 29 is “Hydraulic Power”, and it includes units that are part of the Hydraulic Power system.

What is ATA 23?

Repair ATA Chapter 23 – Communications Speech Communication. Data Transmission & Automatic Calling. Passenger Address, Entertainment & Comfort. Interphone. Audio Integrating.

What is the difference between ATA 100 and iSpec 2200?

ATA Spec 100 was originally published in 1956. … ATA Spec 2100 focused on electronic data exchange implemented in SGML. iSpec 2200 was first published in 2000. It incorporates the previous 100 and 2100 specs which won’t be maintained beyond their final 1999 revisions.

What is the ATA code for instruments?

Ordered Alphabetically by SystemCHSystem29Hydraulic Power30Ice & Rain Protection31Instruments

What are the aircraft zones?

Major ZoneArea200Upper half of the fuselage to the rear pressure bulkhead300Empennage, including fuselage aft of the rear pressure bulkhead400Power plants and struts or pylons500Left-wing

What is the a4a iSpec 2200 system for No 39?

ATA iSpec 2200 is a global aviation industry standard for the content, structure, and electronic exchange of aircraft engineering and maintenance information. It consists of a suite of data specifications pertaining to maintenance requirements and procedures and aircraft configuration control.

Which area of the aircraft is subject to hoop stress?

There are many places in an aircraft where hoop stress must be considered. The most obvious (and most easily visualized) is the stress imposed on the fuselage when the cabin is pressurized at the higher altitudes. Notice that airliners tend to have fuselages which are circular in crosssection.

How often is aircraft maintenance?

Aviation maintenance professionals perform B maintenance checks approximately every 6-8 months. It takes about 160-180 labor hours, depending on the aircraft, and can be completed within 1–3 days at an airport hangar.

What is TSM in aviation?

Search for glossary terms (regular expression allowed) Term. Main definition. TSM. Trouble Shooting Manual.

What is a fault isolation manual?

Fault Isolation Manual or “FIM” – means the Manual that deals with methods that can isolate the component, device or software module causing the error.

What does SRM stand for in aviation?

Single-pilot resource management (SRM) is the art of managing all onboard and outside resources available to a pilot before and during a flight to help ensure a safe and successful outcome. Incorporating SRM into GA pilot training is an important step forward in aviation safety.

What governs the ultimate fatigue life of an aircraft?

“Aircraft lifespan is established by the manufacturer,” explains the Federal Aviation Administration’s John Petrakis, “and is usually based on takeoff and landing cycles.

What is ATA chapter25?

ATA Chapter 25 – Equipment & Furnishing.