The parging material consists of portland cement, sand and other aggregates. The sand gives the cement its stickiness — it can be applied up to 2 inches thick, although a 1/2-inch coat is generally sufficient.

How thick can parging be applied?

Designed for parging concrete blocks or poured concrete to level fill imperfections up to ⅜″ deep. Can be used above or below grade. Surfaces must be structurally sound. Remove all sand, dirt, dust, paint, etc.

What material is used for parging?

Parging cement consists of sand and Portland cement, sometimes called a sand mix. The mix becomes a sticky substance when you add water. The product’s consistency must be sticky so it solidifies onto a vertical structure without sliding down.

Can you Parge over old parging?

Applying a new layer of parging on top of an old layer is useless because it will also crack and fall off. It’s therefore advisable that you get rid of the parging that’s already damaged. Since you can’t remove the old parging with your bare hands, you will need a cold chisel and a mallet.

What can I use instead of parging?

You can use acrylic stucco as a viable option for parging over concrete foundation walls. However, not all concrete foundation walls can effectively be parged using acrylic stucco. This kind of parging system comprises the last three layers Exterior Insulation and Finish Systems, commonly referred to as EIFS.

What is the best parging mix?

Use SAKRETE Parging Mix, a cement mixture designed to create superior bonding, or to smooth concrete walls. Available in 25 KG bags. Go with SAKRETE, The Pros Choice since 1936. Parging Mix, 25 KG is rated 4.8 out of 5 by 33.

What is the difference between parging and stucco?

What is Parging? Parging is a technique used by masons to cover the surface of a masonry wall. It’s similar to stucco, utilizing a specialized mortar to cover exterior and interior masonry block and stone walls. A fresh coat of parging works to protect and shield your home’s foundation from all of nature’s elements.

Why is my new parging cracking?

Why Do Parging Cracks Appear? Although used as a moisture barrier, parging itself can sometimes become wet. When this happens, the water inside the parging can freeze and expand – resulting in cracks.

How do you prep concrete for parging?

Start by chipping away at the cracked/loose concrete with a concrete chisel. Then brush the area with a wire brush—that will get rid of any loose bits, dust and debris. Then hose off the entire area with water. You can also add a little dish soap—parging sticks better to a clean surface.

How do you make parging smooth?

Start at the bottom corner of one wall and in a single smooth motion, smear the mortar upward 2 to 3 feet from your starting point. Repeat, overlapping each new smear with the previous one until you have covered the whole wall. Dip the trowel in water to smooth the parged surface.

Article first time published on

How long does parging take to cure?

Parging mix must be fully cured (approximately 28 days) and dry before painting. Refer to paint manufacturer directions for application instructions.

Which quikrete to use for parging?

QUIKRETE® Water Resistant Parging Mix (115525) is a Masonry coating and patching of concrete walls for cosmetic.

How much does it cost to Parge a foundation?

Parge foundation walls $3 – $4 / sq. ft. Damp proof foundation walls and install weeping tile $60-$120 / lin. ft.

What causes parging to fall off?

A sudden drop in temperature is bad news for a freshly applied coat of parging. Water soaks into the parging, then expands as it freezes, cracking the surface and breaking off chunks. If the ambient temperature is too cold -the Parging freezes.

Should you paint parging?

Why Not Paint Concrete? Applying parging to foundation walls helps to provide a first layer of defense against the exterior elements. … Paint, and especially acrylic paint, does not have these moisture-transferring properties. That means if the paint cracks, and it will, water can seep behind it and has nowhere to go.

Should parging be sealed?

Parging and sealing are absolute musts for foundation walls with exterior insulation, brickwork, or other materials. … If your walls are decaying or crumbling, call us today at 1-855-381-1528 for a free parging and sealing quote.

Is parging waterproof?

While parging is not waterproofing, and shouldn’t be thought of as a good enough barrier in and of itself, it can be an important player on your home’s waterproofing team. Parge coats, properly applied, can act as a barrier against rain and snow for the foundation walls that rise above the soil.

Can you Parge with stucco?

Unpainted parging can be scored and stucco applied using a bonding admixture. Most of the time, parging is pretty soft because it has a lot of sand in the mix, usually 3:1 or greater.

Is parging necessary?

The importance of parging Parging is vital to any wall to protect its surface from external forces such as rain, wind, ice, and snow. This protection removes the potential risk of moisture seeping into a masonry wall, as this can expand when frozen and crack the installation.

How long does parging cement take to dry?

Depending on the outdoor temperature, it will depend on how long it will take for the parging to cure; however an average of one week is typical, and perhaps longer in high humidity or damper climates.

Can you Parge a painted wall?

Parging mix sticks to walls better when they’re free of dirt and debris. When applying parging over painted walls, coat the walls with a bonding agent before you begin. This bonding agent will help the mortar bond more successfully with the painted surface.

Will parging stick to paint?

Short answer; you definitely can, but you shouldn’t. Considering that we live in Alberta, Canada, the weather conditions will not be kind no matter what kind of paint that you choose to use. …

Will parging stick to blueskin?

Blueskin is a rubberized asphalt membrane laminated to a Polyethylene film. … After the parging layers have dried, a primer is rolled on and then the Blueskin applied over the primer. The priming layer provides the perfect surface for the Blueskin to adhere to and provides a small amount of damp-proofing on its own.

What is Chimney parging?

The most common repair to your chimney’s smoke chamber — which serves to funnel smoke from the fireplace opening into the flue — is parging. Parging is a coating of mortar applied to the brick to give the smoke chamber a smooth surface. … During a chimney fire, the parging is often cracked and damaged.

Can you Parge over Styrofoam?

PARGING OVER EXPOSED RIGID FOAM INSULATION HAS NEVER BEEN SO EASY. COVERAGE: A 25kg pail of Parge-Plus will cover approximately 7.0m (75ft). It will cover slightly less if you’re covering a very rough surface, or trying to achieve a thick, highly-textured look.

How do you skim coat a foundation?

Spread the cement onto the wall, using the flat side of the trowel to smooth the cement. Remove excess cement using the edge of the trowel in a scraping motion. Apply a thick enough coat to cover the surface with an even coat of cement. Allow the skim-coat to dry for 24 hours before painting.

How do you fix hairline cracks in parging?

Hairline cracks in the parging are perhaps unsightly, but are of little consequence structurally. Remedy, chip away the loose mortar, paint the area to be patched with a liquid nail, cement bonding agent, then trowel on a new layer of parging mix (available in a just-add-water bag).

How do you make parging mix?

For a quality parging mix its best to use a mix of about about 3 parts sand to at least 1 part portland cement. You can add 1/4 to 1/2 part lime powder to make it a little easier to spread or apply. This is mixed with enough water to get a nice consistency, not too runny.

How long do you leave render before floating?

If you notice that the float is ‘pulling’ at the surface of the render, it may not be ready to be floated. Wait for 10 minutes and try again. If you are applying a second coat, wait at least 24 hours between coats.