To remove the keys, slip your tool under the top of the cap and gently lift it up. It should pop off without much force. With the keycaps off, use compressed air to blow out all the dust and hair. To put the key back, line the keycap up and push it back down starting with the bottom edge.

How do you take off a key without breaking it?

To remove the keys, slip your tool under the top of the cap and gently lift it up. It should pop off without much force. With the keycaps off, use compressed air to blow out all the dust and hair. To put the key back, line the keycap up and push it back down starting with the bottom edge.

Can you remove keys without a tool?

As an alternative to a knife or flathead screwdriver, you can shape a paperclip to work just like a keycap puller. Unbend the paperclip completely, then reshape it into a “U”, and then bend the ends inwards so that they can hook under a key in the same way a keycap puller works.

What is the easiest way to remove keys?

Insert a flat object below the key, such as a small flathead screwdriver or a car key, as shown in the picture. Once placed below the key, twist the flat object or push down until the key pops off. If you want to remove more than one key, repeat this process until all keys are removed.

Can you remove keys from a keyboard?

To remove the keycap from a keyboard, place your finger nail, small flat-head screwdriver, or knife under a corner of the key and gently pry it up. For a longer key, such as the spacebar key, try to pry as close to the center of the key as possible. In many situations, the key only snaps out partially.

How do you make a key cap remover?

1. Step 1: Straighten your paperclips. You’ll need three paperclips to make the keycap puller. …
2. Step 2: Create the two puller pieces. …
3. Step 3: Make two more bends. …
4. Step 4: Wrap those pieces together. …
5. Step 5: Straighten everything out.

Can you remove keycaps by hand?

Put together a cheap keycap puller with a pair of paperclips, a twist-tie, and pliers. In order to thoroughly clean your mechanical keyboard, you may want to remove the keycaps. … You can just make your own keycap puller with stuff you probably have lying around.

What does a membrane keyboard look like?

A membrane keyboard is a computer keyboard whose “keys” are not separate, moving parts, as with the majority of other keyboards, but rather are pressure pads that have only outlines and symbols printed on a flat, flexible surface.

What is the easiest way to remove keycaps?

To remove the keycap, hold the keyboard steady with one hand and press the tool down on the key. Be sure that the tool is securely underneath the keycap. Pull straight up once the tool grabs the bottom of the cap. Avoid pulling the keycap at an angle.

How do you clean under the keys of a laptop?

To clear out the biggest crumbs, dust, or other debris that wandered into your keys, turn your laptop upside down and allow them to fall out. Gently tap the bottom of the chassis to dislodge any stubborn particles. You can also press cleaning slime into the spaces between your keys, which sticks to and picks up debris.

Article first time published on

Can you remove keycaps without tool?

Below are the steps to remove keycaps without a tool: Move the keyboard you want to remove the keycaps to a safe, dry spot on your desktop. To cover keycaps, use a twisted paper clip or a credit card. You can also use things such as a house key, a knife, or if you have an outdated PC chassis, you can use a PV porthole.

How do I remove a keycaps without a tool mechanical keyboard?

You could do it with a paper clip (probably wouldn’t work with the small ones) couldn’t you? Just by bending it so it has a flat edge you could put under the key and hold both ends while pulling up gently, or just do that with 2 paper clips which essentially mimics some key pullers.

How do you clean key caps?

1. Remove the keycaps from your keyboard.
2. Place the keycaps into the container of warm soapy water and let it sit for 30 to 60 minutes. …
3. Clean your keyboard by using light compressed air to clear out dust and a damp cloth to clean out any built up grime.

How do you replace a laptop key?

1. Click the Start button to open the Start menu and click “Control Panel.”
2. Click “Change Keyboard or Other Input Methods” under the Clock, Language, and Region heading.
3. Click the button labeled “Change Keyboards.”

Can you take the keys off a HP laptop?

Carefully remove the key by prying at least two sides up with the plastic removal tool. There are two square, black pieces under the key. A smaller piece may be stuck to the back of the key piece.

How do you remove a key from a switch?

There are tiny tabs on the top and bottom of each switch. Use your tool to hook under those two tabs before squeezing them. This will press the tabs in, allowing you to pull the whole switch directly upward.

How do you take the keys off a mechanical keyboard?

1. Step 1: Get a Keycap Puller (Or A DIY One) Plastic vs Wire Keycap Puller. …
2. Step 2: Insert Keycap Puller Onto Keycap. The next step is to insert your keycap puller. …
3. Step 3: Gently Pull Until the Keycap is Removed. Now all you need to do is pull.

Can you replace keys on a membrane keyboard?

You can’t change a keyboard from a membrane to mechanical without changing the board. The keycaps have nothing to do with it. In short, your best option is to buy a mechanical keyboard.

How do I know if my keyboard is mechanical or membrane?

On your keyboard, tap the key and see how loud it sounds. If it’s quite loud and clicky, it’s almost certainly a mechanical keyboard. Alternatively, lift one of the keys off the keyboard carefully and check if there is a switch underneath the key. If there is, it’s a mechanical keyboard.

Can you replace keys on any keyboard?

You can exchange any two keys that are the same size. For example, if your “H” key were sticking or lost, you could replace it the Windows menu key.

How much does it cost to replace a keyboard key?

Type of RepairPrice RangeKeyboard Replacement$80-195Laptop Screen Replacement$125-225+Hard Drive Replacement$100-$225Data Recovery$99-1000+

How do you put a key back on a laptop?

If a keycap comes off your laptop’s keyboard, snap the keycap back onto its key retainer; listen for a click to be sure it’s secured. Key retainers are usually small pieces of round or square plastic that fit around the underside of your keycap. Be gentle!